Interra KNX Binary Inputs serve as an interface for the operation of KNX systems via conventional pushbuttons, switches, or floating contacts as well as for processing binary signals. They can be configured as sensors, switches, or potential-free push buttons. In addition, weather data can be transmitted to the KNX bus for further evaluation via an appropriate weather sensor. The Binary Inputs are powered via the KNX and do not require an additional power supply.
Main Functions:
Depending on ETS configuration and settings, the product features will be different. Available functions are:
• Switching • Toggle • Mode Selection
• Dimming • Shutter/Blind • Value Operation
• RGBW Control •Scene Control •LED Control
Most functions only need one input, and therefore each input might be assigned a different function. However, there are also some functions that use six inputs, such as “Dimming with 6 buttons” and “Shutter/ Blinds with 6 buttons”.
For the controls via a 1 button and 2 button operations. Switching via a single push button is also possible.
For control/slat adjustment of a blind or a shutter in 1 push-button operation and 2 push-button operations.
For sending arbitrary values of different data types, e.g. temperature values. It is possible to send different values or data types after a short/long operation.
For dimming of lighting via a 1 button and 2 button operation. Start-stop dimming and stepwise dimming, as well as dimming via a single push button, are possible.
It's possible to change the operation to the opposite with a single push button.
Different controls via a single push button by choosing long-press or short-press options are possible.
Product Downloads
